Magnetic Rope Testing devices

ROPESYS offers rope testing devices for the most different applications

 

Models

The magnetic rope testers are offered in the R (round/closed) and U (bottom open) series. Depending on the application, the optimum design can thus be selected.
While R magnets completely enclose the rope during the test and can be arranged as desired, U magnets allow the rope to pass obstacles such as support saddles or rope riders.

Sizes / clearances

Three sizes are available for each of the R and U designs. The size number indicates the maximum inside diameter of the respective tester.

R28
Der R28 ist ein Leichtgewicht unter den Seilprüfgeräten. Dank seiner kompakten Bauweise eignet er sich auch für beengte Platzverhältnisse. Der R28 kann für Seile bis 28mm Durchmesser eingesetzt werden: Zugseile von Seilbahnen, Hubseile von Regalbediengeräten, Hubseile von Krananlagen, Förderseile von Skiliften etc.
U28
The U28 is specially designed for testing track ropes of small ropeway installations. Due to the attached pneumatic cylinders, all obstacles such as supports and rope riders can be passed over effortlessly and safely.
R58
The R58 is suitable for ropes with a maximum diameter of 58mm and a maximum metallic cross-section of 1800mm². This means that it can be used for all hoisting ropes of chair lifts and cable cars, hoisting ropes of large crane systems, in the offshore industry as well as in the area of mines and shaft hoisting systems.
U58
The U58 is specially designed for testing track ropes of ropeway installations. Due to the attached pneumatic cylinders, all obstacles such as supports and rope riders can be passed over effortlessly and safely.
R83
With the R38, ropes up to a maximum diameter of 83mm can be tested.
U83
The U83 is specially designed for testing track ropes of big ropeway installations. Due to the attached pneumatic cylinders, all obstacles such as supports and rope riders can be passed over effortlessly and safely.

INTEREST IN OUR ROPE TESTERS?

Please contact us without obligation.

Data protection info:

If you send the data entered in the contact form by clicking on the following button, you agree that we use your data for the answer of your inquiry and/or establishment of contact. A transfer to third parties does not take place unless applicable data protection regulations justify a transfer or we are legally obliged to do so. You can revoke your consent at any time with effect for the future. In the event of revocation, your data will be deleted immediately. Your data will otherwise be deleted when we have processed your request or the purpose of storage has ceased to apply. You can inform yourself at any time about the data stored about your person. Further information on data protection can also be found in the data protection declaration of this website.

We will be happy to advise you!

ROPESYS GmbH

Tränkestraße 9 b
D-70597 Stuttgart
info@ropesys.com
+49 (0) 711 252 736-0